- Remington 12 ga. 3″ 1187 Magnum Parkerized Receiver with an 18″ Barrel Rifled Barrel
- Scout Optics with Extened Eye Relief
- E-Z Feed Direct Feed Lifter Assembly
- Extended Magazine Tube, Total Capacity: 7 rounds
- Extended Cocking Handle
- Side Saddle Shell Carrier, Extended Capacity: 6 rounds
- Synthetic Buttstock and Fore Grip
- Adjustable and Collapsible Bipod
- High Visibility, Non-Binding Follower
- Performance Rated Magazine Tube Spring
- Jumbo Head Safety
- Multi-Purpose Tactical Sling
- Quick Detachable Steel Buttstock and Bipod Swivel
Description: Highly modified Remington 12 gauge Model 1187P Magnum, Parkerized Shotgun with an 18″ Rifled barrel and Scout Optics. Total capacity, 7 rounds. Overall length: 38.50″. Weight: 9.50 lbs.
Sights: The sight consists of a 2.75 power long eye relief optical scope with a duplex reticle. It is mounted to the barrel using matt finished steel rings and in position forward of the receiver. To reduce wear, the scope body is made of hard anodized aluminum and has a non-reflective matt finish. To maintain consistent accuracy, the barrel is attached to the receiver using heat-treated screws.
Magazine: The magazine tube consists of the standard tube to which a chrome-moly extension has been added. In addition, a high visibility, non-binding follower made of green fluorescent grade ABS nylon has been installed to insure smooth operation. For positive feeding, a performance rated magazine tube spring, made of stress relieved high carbon spring wire, is also included. Both ends of the spring have reduced diameters which fit the tail of the follower. To increase the firearms total shell carrying capacity to 13, a 6 shot side saddle is attached to the receiver.
Stocks: For strength and shooter comfort, a Monte Carlo type buttstock made of fiberglass filled polypropylene with a special recoil absorbing round edge buttplate has been installed. The fore grip is made of the same material as the buttstock.
Bipod: For support during firing, an adjustable and collapsible bipod made of steel has been attached. The legs of the bipod are designed to pivot forward and out of the way when not needed. They may also be extended in length to accomodate the contour of the surface upon which it is placed.
Sling: The three-way adjustable action sling is made of mil-spec nylon which is 11/4″ wide. It is designed for use in different modes of carry such as; standard over the shoulder, hands free over the chest, and in a back pack carry position. It attaches to the firearm at the buttstock and bipod with a steel quick detachable swivel.
Safety: For use in colder climates and/or where gloves are required, a jumbo head safety made of pre-heat treated chrome-moly steel has been installed.